![]() Triple rinse the spray tank and flush all sprayer components with water to remove residual product. ![]() Irrigate to move the residual herbicide into the soil, but not to the point of visible runoff. Under drought conditions, it may be necessary to lightly water the product in.Rain or watering 30 minutes after application will not wash away effectiveness.Disturbing the soil after application may reduce the effectiveness of this product by disturbing the weed preventative barrier.Add appropriate amounts of water and product to spray tank. Add 16 oz of product per 1 gallon of water.The maximum applied rate must not exceed 32 fl oz of product/1000 sq ft. Certain hard-to-control weeds can be re-sprayed 1 month after initial treatment only using spot treatment. A subsequent application of SPECTICLE TOTAL can be made 4 months after the initial application to extend weed control.Thoroughly spray existing weeds and the entire area that you want protected.Best results will be achieved when temperatures are above 60 degrees Fahrenheit. Apply to small and actively growing weeds.Coarse soils, for example, may include significant quantities of sand, gravel, decomposed granite, and ground cinders. Excessively coarse or sandy soils may allow for downward movement of SPECTICLE TOTAL into the root zone and cause significant root damage and phytotoxicity. Soil conditions can affect the tolerance of ornamentals to SPECTICLE TOTAL. USE AROUND ORNAMENTALS IN COARSE AND SANDY SOILS: Tall Fescue, Kentucky Bluegrass, Fine Fescue and Ryegrass) Do not apply where heavy rainfall or irrigation can runoff into cool season lawns (e.g.Do not apply using a steel sprayer, except stainless steel.If the spray accidentally contacts a desirable plant, rinse it off immediately with water. If spraying near the base of established plants (plants that have been in the ground at the same location for one or more years), shield them from spray drift using cardboard, plastic, or other materials.Avoid tracking product onto desirable vegetation - do not walk on treated area until the spray has dried.Apply when the air is calm to avoid spray drift onto desirable plants. Do not allow spray to contact desirable foliage, stems, green bark, or bare roots of turfgrasses, trees, shrubs, or other listed desirable vegetation, since.Do not apply around the root zone of herbaceous plants.Do not use over-the-top of ornamentals.Seed may be planted 12 months after application.Do not allow people or pets to enter the treated area until sprays have dried.Do not use this product in or around vegetable gardens or in landscaped areas where young plants including ornamental bedding plants (annuals and/ or perennials), trees, shrubs, and sod will soon be planted within 6 months after treatment.Avoid application directly to desirable plants including desirable turfgrass. Treat area to be protected from weeds existing weeds will be controlled. Paths, Parking Lots, Curbs, Sidewalks, Driveways, Around Buildings, Gravel Areas, Loading Ramps, Educational Facilities, Storage Yards, Vacant Lots, Fence Rows, Parks, Hardscapes, Municipal, Mulched Areas, Landscape Ornamental. Indaziflam - 0.089% Diquat dibromide - 0.890% Glyphosate isopropylamine salt - 20.460%Ĭhickweed, Clover, Corn speedwell, Curly dock, Evening Primrose, Dandelion), Filaree, Fleabane, Gromwell, Groundsel, Hairy fleabane, Henbit, Horseweed, Lambsquarters, Ragweed, Annual bluegrass, Barnyardgrass, Crabgrass, Foxtail, Goosegrass, Ryegrass.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |